3.2 m to 4.2 m class VTOL

Albatross

More wing. More time in the air.

0°

Shown: Albatross 4.2 · Drag to rotate · try Exploded

Variants4
Wingspan3.2–4.2 m
EnduranceUp to 3 h
Control rangeUp to 45 km
Design

Built for the long mission.

Wings from 3.2 m to 4.2 m carry more energy and more payload, so Albatross stays up longer and reaches further than any other VTOL in the fleet.

01

Long endurance

Large wing and battery bay sized for extended missions.

02

Heavier payloads

Carries larger sensors, or more than one payload together.

03

VTOL anywhere

No runway, catapult or net: vertical take-off and landing.

04

MultiD inside

MultiD flight controller, ESCs and GCS software as standard.

Variants

Pick the wingspan.

Albatross comes in 4 wingspans. Each step up adds range, service ceiling or payload capacity, on the same layout, electronics and ground software.

3.2 m class

Albatross 3.2

The entry Albatross, for long-endurance survey and ISR.

Range120 km
Service ceiling4,000 m
Payload1 kg
Get a quote
3.5 m class

Albatross 3.5

A step up in range and payload for wide-area patrol.

Range130 km
Service ceiling4,000 m
Payload2 kg
Get a quote
3.8 m class

Albatross 3.8

More margin for high-altitude operations and heavier sensors.

Range150 km
Service ceiling4,000 m
Payload4 kg
Get a quote
4.2 m class

Albatross 4.2

Our largest wing, for maximum endurance and payload.

Range200 km
Service ceiling4,500 m
Payload5 kg
Get a quote
Payload options

Choose the eyes.

Every Albatross takes interchangeable payloads on a common mount. Choose the sensor for the job; larger variants carry the heavier options with more endurance to spare.

Need a different payload?
ISR pod~870 g

Four-sensor ISR pod

Zoom, thermal, wide-angle and a laser rangefinder in one pod, for target location and day-night surveillance.

30x optical zoom640 × 512 thermalLaser range 5–1,200 mWide-angle
Long zoom~630 g

30x optical zoom camera

Long-range daylight surveillance with AI identification and tracking, and starlight performance in low light.

3-axis4K · 8 MP30x optical · 180x hybridAI tracking
Thermal~200 g

Dual-sensor thermal pod

Thermal and 4K visible cameras in one light pod, for night patrol, search and rescue and hot-spot inspection.

640 × 512 thermal4K visible3-axis
Mapping

Mapping camera

A high-resolution nadir camera for orthomosaics, contour maps and 3D models, with survey grids planned in MultiD GCS.

NadirHigh resolutionSurvey grids
Survey

LiDAR scanner

Terrain and corridor mapping through vegetation, for roads, rail, power lines and border infrastructure.

Terrain modelsCorridor mapping
Comms

Communications relay

Puts a radio repeater at altitude to link teams separated by ridges, valleys or buildings.

Line-of-sight extension

Weights are approximate. We integrate proven gimbals today and qualify Indian-made payloads as they become available.

Control and range

Choose your reach.

Albatross ships with the ground controller that matches your mission. Each one carries control, telemetry and HD video on a single link.

Compact
15 km

Handheld controller with a 5.5-inch bright screen and 1080p video, light enough for operators on the move.

Enterprise
15 km

Handheld with a 7-inch screen, two Full HD video feeds and dual-operator control. Extendable to about 30 km with a repeater.

Long range
40 km

Handheld ground station with a 7-inch, 1,600-nit 1080p screen and a dual-band 2.4 / 5 GHz link for long survey and patrol missions.

Extended range
45 km

Ground station with a 10.1-inch 1080p screen and a triple-band link that keeps control and video alive in a crowded RF environment.

Typical for Albatross
Antenna tracker · Extreme long range

Go beyond the horizon of a handheld.

An auto-tracking mount keeps a high-gain directional patch antenna pointed at the aircraft throughout the flight, extending the link well past what a controller's own antennas can reach.

Typical for Albatross

Ranges are manufacturer maximums in unobstructed, interference-free conditions. Real-world range depends on terrain, altitude and the RF environment.

Made in India

Made here. More of it every year.

Albatross is designed, built and flight-tested in Bengaluru with Indian partners. A few parts still come from abroad, and we are replacing them with parts made in India.

Indigenous content · DAP 2020
79%
of Albatross's price is Indian content

Counted the way DAP 2020 does it: the price without taxes, less imported parts, foreign services and fees paid abroad. How we calculate this →

Armed forces · DAP 2020Buy (Indian-IDDM): Indian design, at least 50%
Compliant
Armed forces · Draft DAP 2026At least 60%, with design and source code owned in India
On track
Armed police · GFRClass-I local supplier: at least 50% local content
Class-I
Tech specs

Albatross at a glance.

Request spec sheet
Albatross 3.2Albatross 3.5Albatross 3.8Albatross 4.2
Wingspan3.2 m3.5 m3.8 m4.2 m
Max take-off weight10 kg12 kg15 kg18 kg
Payload1 kg2 kg4 kg5 kg
Endurance2 h2.5 h2.5 h3 h
Range120 km130 km150 km200 km
Service ceiling4,000 m AMSL4,000 m AMSL4,000 m AMSL4,500 m AMSL
Cruise speed110 km/h110 km/h120 km/h120 km/h
Layout4 lift + 1 pusher4 lift + 1 pusher4 lift + 1 pusher4 lift + 1 pusher
Control rangeUp to 45 kmUp to 45 kmUp to 45 kmUp to 45 km
Get in touch

See Albatross fly.

Book a live demonstration at your site, or ask for a quote configured to your mission.

Request a demo Get a quote
contact@multid.co.inKogilu Main Road, Yelahanka, Bengaluru, KA 560064LinkedInInstagram